Siemens SCALANCE W1750D CLI - Show Ap Debug Airwave-Events-Pending

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
313
4.16.37 show ap debug airwave-events-pending
Description
This command displays the pending AirWave server events.
Syntax
show ap debug airwave-events-pending
Usage Guidelines
Use this command to view the pending AirWave server events.
Example
The following example shows the partial output of the show ap debug airwave-events-
pending command:
<t11>
<e61>1106</e61>
<e62>654</e62>
<e1005>6c:f3:7f:56:7f:60</e1005>
<e1006>7SPOT</e1006>
<e1001>d8:c7:c8:cb:d4:20</e1001>
<e1056>2</e1056>
<e1017>d8:c7:c8:cb:d4:20</e1017>
<e1018>1</e1018>
<e1058>Varbind deprecated</e1058>
</t11>
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode