Siemens SCALANCE W1750D CLI - Show Ap Arm

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
275
4.16.20 show ap arm
Description
This command displays information about bandwidth management, historical statistics, AP
neighbors, RF summary, and scanning details for the AP.
Syntax
show ap arm {bandwidth-management | history | neighbors |rf-summary | scan-times}
Parameter
Description
bandwidth management
Displays ARM bandwidth details for an AP.
history
Displays detailed information about the ARM configuration changes over
a period of time.
neighbors
Displays details about the ARM neighbors.
rf-summary
Displays a summary of RF configuration information for an AP
scan-times
Displays ARM channel scanning details for an AP.
Usage Guidelines
Use this command to view information about the ARM bandwidth configuration, historical
statistics, AP neighbors, RF summary, and scanning details on an AP.
Example
show ap arm bandwidth-management
The following example shows the output of
show ap arm bandwidth-management command:
Interface :wifi0 Shaping Table
-------------
Client Tx Pkt Tx Byte (KB) Tx Alloc (ms) Tx Time (ms) Rx Time (ms) Active Time (ms) -
----- ---
--- ------------ ------------- ------------ ------------ --------------
Tx Rate (mbps)
---------
Interface :wifi1 Shaping Table
-------------
Client Tx Pkt Tx Byte (KB) Tx Alloc (ms) Tx Time (ms) Rx Time (ms) Active Time (ms) -
----- ---
--- ------------ ------------- ------------ ------------ --------------
Tx Rate (mbps)
---------