CLI Commands
4.16 S
SCALANCE W1750D CLI
276 Function Manual, 03/2019, C79000-G8976-C452-04
The output of this command includes the following information:
Displays the Wi-Fi interface configured on the AP.
Displays information on the ARM configuration details for the clients associ-
Displays the list of AP clients connected through the Wi-Fi interface.
Displays the transmission packet details associated with the interface.
Displays the number of bytes in the transmission packets associated with the
Indicates the time allocated for transmission in milliseconds.
Indicates the transmission time in milliseconds.
Indicates the reception time in milliseconds.
Indicates duration until which the Wi-Fi devices are active.
Indicates the current speed at which data is transmitted through the Wi-Fi
show ap arm history
For each interface on an AP, the
show ap arm history command shows the history of
channel and power changes due to ARM. ARM can automatically change channel and
power levels based on a number of factors such as noise levels and radio interference. The
following example shows the output of the
show ap arm history command:
Interface :wifi0 ARM History
-----------
Time of Change Old Channel New Channel Old Power New Power Reason
-------------- ----------- ----------- --------- --------- ------