Siemens SCALANCE W1750D CLI - Hotspot Anqp-3-Gpp-Profile

CLI Commands
4.8 H
SCALANCE W1750D CLI
122 Function Manual, 03/2019, C79000-G8976-C452-04
Example
The following example configures host name for an AP.
(scalance)# hostname AP1
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.8.5 hotspot anqp-3-gpp-profile
Description
This command configures a 3GPP Cellular Network for hotspots that have roaming
relationships with cellular operators.
Syntax
hotspot anqp-3gpp-profile <profile-name>
3gpp-plmn1…3gpp-plmn6 <PLMN-ID>
enable
no…
Parameter
Description
hotspot anqp-3gpp-
profile
<profile-name>
Creates a 3GPP profile.
3gpp-plmn1…3gpp-plmn6
<PLMN-ID>
Configures the PLMN value of the network. The PLMN value can be
specified for first, second, third, fourth, fifth, and sixth highest priority
network.
The PLMN ID consists of a 12-bit MCC and the 12-bit MNC.
enable
Activates the configuration profile.
no…
Removes the configuration
Usage Guidelines
Use this command to configure a 3GPP Cellular Network hotspot profile that defines the
ANQP information element for 3G Cellular Network for hotspots. The IE defined in this profile
will be sent in a GAS query response from an AP in a cellular network hotspot. The 3GPP
MCC and the 12-bit Mobile Network Code data in the IE can help the client select a 3GPP
network when associated with a hotspot profile and enabled on a WLAN SSID profile.