Siemens SCALANCE W1750D CLI - Show Datapath

CLI Commands
4.16 S
SCALANCE W1750D CLI
450 Function Manual, 03/2019, C79000-G8976-C452-04
The output of this command shows the percentage of CPU utilization
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.115 show datapath
Description
This command shows the system statistics for your AP.
Syntax
show datapath {acl <ID>|acl-all|acl-allocation|acl-rule <rule>|acl-rule-
detail<acl>|bridge|bwm-table|counters|device <statistics>|https-blocked-ip-cache|ipv6
{session|user}|dmo-session|dmo-station <mac>
|dns-id-map|mcast|nat-pool <ID>|route|sbr|session[ucc|dpi
<verbose>]|statistics|user|vlan|vlan-mcast[vlan-ID]|vlan-port-mapping|dns-ip-learning
}
Parameter
Description
acl <ID>
Displays datapath statistics associated with a specified ACL.
acl-all
Displays datapath statistics associated with all ACLs.
acl-allocation
Displays ACL table allocation details.
acl-rule <rule>
Displays the name of the ACL.
acl-rule-detail <acl>
Displays the ACL rule details.
bridge
Shows bridge table entry statistics including MAC address, VLAN, as-
signed VLAN, Destination and flag information for anAP.
bwm-table
Displays the configured bandwidth contracts and the allocated bandwidth
contracts.
counters
Displays various counters maintained in the datapath. This parameter is
useful in debugging any datapath issue.
device <statistics>
Displays various datapath counters for packets that are received fromand
sent to the devices.
https-blocked-ip-
cache
Displays cached entries for the HTTPS error page ACL in datapath.
ipv6 session
Displays datapath for IPv6 session table.
ipv6 user
Displays datapath statistics for IPv6 users.
dmo-session
Displays details of a DMO session.
dmo-station <mac>
Displays details of a DMO station.
dns-id-map
Displays IP address of the domain name configured in a domain-based
ACL.