Siemens SCALANCE W1750D CLI - Show Alg

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
263
Type
code
Description
Code
Detailed Description
5 11
DHCP request timed out
This client did not receive a response to its DHCP request in time. Recom-
mend checking the status of the DHCP server in the network.
10 12
Wrong Client VLAN
VLAN mismatch between the AP and upstream device. Upstream device can
be upstream switch or RADIUS server.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.13 show alg
Description
This command displays the ALG protocol information configured on an AP.
Syntax
show alg
Usage Guidelines
Use this command to view configuration details for the ALG protocols. An application-level
gateway consists of a security component that augments a firewall or NAT used in a
network.
Example
The following output is displayed for the show alg command:
Current ALG
-----------
ALG Status
--- ------
sccp Enabled
sip Enabled
vocera Enabled