Siemens SCALANCE W1750D CLI - Show Tspec-Calls

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
595
4.16.215 show tspec-calls
Description
This command displays the TSPEC statistics when voice traffic is prioritized and TSPEC
function is enabled on an SSID.
Syntax
show tspec-calls
Usage Guidelines
Use this command to view the TSPEC statistics.
Example
The following example shows the output of the show tspec-calls command:
TSPEC Stats
SSID
Total ADDTS
Accepted calls
Refused calls
DELTS Received
DELTS Sent
----
-----------
--------------
-------------
--------------
----------
scalance-
ap
0
0
0
0
0
scalance-
ap
0
0
0
0
0
TSPEC SSIDs
------------
SSID Radio Max Bandwidth Available Bandwidth
---- ----- ------------- -------------------
scalance-ap 1 0.00 0.00
TSPEC Calls
-----------
Client Client MAC Allocated Bandwidth Active flows
------ ---------- ------------------- ------------
TSPEC SSIDs
------------
SSID Radio Max Bandwidth Available Bandwidth
---- ----- ------------- -------------------
scalance-ap 0 0.00 0.00
TSPEC Calls
-----------
Client Client MAC Allocated Bandwidth Active flows