Siemens SCALANCE W1750D CLI - Convert-Aos-Ap

CLI Commands
4.3 C
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
81
Syntax
content-filtering
no…
Parameter
Description
content-filtering
Enables content filtering.
no
Removes the configuration.
Usage Guidelines
Use this command to enable content filter. With content filter feature enabled, you can:
● Prevent known malware hosts from accessing your wireless network.
● Improve employee productivity by limiting access to certain websites.
● Reduce bandwidth consumption significantly.
You can enable content filtering on an SSID. When enabled, all DNS requests to non-
corporate domains on this SSID are sent to the open DNS server.
Example
The following example enables content filtering:
c:a3:1e:cd:7b:d6 (config) # content-filtering
ac:a3:1e:cd:7b:d6 (config) # end
ac:a3:1e:cd:7b:d6# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.3.17 convert-aos-ap
Description
This command allows you to provision an AP as a Campus AP or Remote AP in a controller-
based network.