Siemens SCALANCE W1750D CLI - Show Ssh

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
575
Syntax
show snmp trap-queue
Usage Guidelines
Use this command to view the SNMP traps in queue.
Example
The following example shows the partial output of show snmp trap-queue command:
2013-05-12 14:05:27 An AP (NAME d8:c7:c8:cb:d4:20 and MAC d8:c7:c8:cb:d4:20 on RADIO
2)
detected an interfering access point (BSSID 00:24:6c:80:7d:11 and SSID NTT-SPOT on
CHANNEL 1).
2013-05-12 14:09:53 An AP (NAME d8:c7:c8:cb:d4:20 and MAC d8:c7:c8:cb:d4:20 on RADIO
2)
detected an interfering access point (BSSID 6c:f3:7f:45:5d:20 and SSID 7SPOT on
CHANNEL 1).
2013-05-12 14:10:36 An AP (NAME d8:c7:c8:cb:d4:20 and MAC d8:c7:c8:cb:d4:20 RADIO 2)
changed
its channel from channel 1 (secchan offset 1) to channel 7 (secchan offset 1) due to
reason
12.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.202 show ssh
Description
This command displays the SSH cipher configuration details.
Syntax
show ssh
Example
The following example shows the output of show ssh command.