Siemens SCALANCE W1750D CLI - Show Ap Debug Persistent-Clients

CLI Commands
4.16 S
SCALANCE W1750D CLI
354 Function Manual, 03/2019, C79000-G8976-C452-04
4.16.64 show ap debug persistent-clients
Description
This command displays the information about the persistent AP clients.
Syntax
show ap debug persistent-clients
Usage Guidelines
Use this command to view information about the clients that are persistently connected to an
AP.
Example
The following example shows the output of show ap debug persistent-clients command:
Persistent Clients
------------------
MAC Address ESSID State Expired Update Time Expiration Time
----------- ----- ----- ------- ----------- ---------------
The output of this command includes the following information:
Column
Description
MAC Address
Shows the MAC address of the client.
ESSID
Shows the ESSID used by the client.
State
Indicates the connection status of the client
Expired
Indicates if the client session is expired.
Update Time
Indicates the update time.
Expiration Time
Indicates the time at which the client session expires.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode