Siemens SCALANCE W1750D CLI - Show Ap Allowed-Max-EIRP

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
273
Example
The following example shows the output of the show ap allowed-channels US command for
the AP-215 device:
Allowed Channels for AP Type 215 Country Code US
------------------------------------------------
PHY Type Allowed Channels
-------- ----------------
802.11g (indoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (indoor) 36 40 44 48 149 153 157 161 165
802.11g (outdoor) 1 2 3 4 5 6 7 8 9 10 11
802.11a (outdoor) 149 153 157 161 165
802.11g 40MHz (indoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (indoor) 36-40 44-48 149-153 157-161
802.11g 40MHz (outdoor) 1-5 2-6 3-7 4-8 5-9 6-10 7-11
802.11a 40MHz (outdoor) 149-153 157-161
802.11a 80MHz (indoor) 36-48 149-161
802.11a 80MHz (outdoor) 149-161
802.11a (DFS)
The output of this command includes the following information:
Parameter
Description
PHY Type
Indicates the PHY type.
Allowed Channels
Displays the list of allowed channels for a specific regulatory domain.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.19 show ap allowed-max-EIRP
Description
This command displays the maximum EIRP settings for the country in which the AP is
currently operational. You can also view the maximum EIRP settings for a specific country.