Siemens SCALANCE W1750D CLI - Show Ap Debug Network-Bssid

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
353
May 9 01:25:51 auth 08:ed:b9:e1:51:87 d8:c7:c8:c4:29:8a d8:c7:c8:c4:29:8a 60 -
The output of this command includes the following information:
Column
Description
Timestamp
Indicates timestamp for the authentication management frame.
stype
Indicates the type of the packet.
SA
Indicates the source of the packets.
DA
Indicates the destination to which the packets are intended.
BSS
Indicates the BSSID.
Signal
Indicates the signal level.
Misc
Indicates miscellaneous information such as status and other relevant de-
tails.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.63 show ap debug network-bssid
Description
This command displays the mapping of WLAN index and BSSID for an AP. When this
command is executed on a master AP, it displays the mapping details of the slave AP.
Syntax
show ap debug network-bssid [<mac> | all]
Parameter
Description
<mac>
Displays the mapping of WLAN index and BSSID along with the MAC
address.
all
Displays the virtual AP status that includes all types of status details.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode