Siemens SCALANCE W1750D CLI - Show Rlts-Logs

CLI Commands
4.16 S
SCALANCE W1750D CLI
568 Function Manual, 03/2019, C79000-G8976-C452-04
Ltd/CN=ClientCert/emailAddress=lzheng@arubanetworks.com
Issued On :Mar 24 15:25:24 2011 GMT
Expires On :Mar 21 15:25:24 2021 GMT
Signed Using :SHA1-RSA
RSA Key size :1024 bits
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.16.197 show rlts-logs
Description
This command displays the debugging logs generated for the RTLS tags by the AP
Syntax
show rtls-logs
Usage Guidelines
Use this command to view the debugging logs generated for the RTLS tags.
Example
The following example shows the output of the show rtls-logs command:
2018-04-13 07:49:33 ----------AS (aeroscout) Config------
2018-04-13 07:49:33 AP - f0:5c:19:c9:c5:18, IP - 10.65.65.221, Port- 15407
2018-04-13 07:49:33 TOUT 0, TAG ADDR 00:00:00:00:00:00
2018-04-13 07:49:33 DFactor 0 DTimeout 0
2018-04-13 07:49:33 Report Tag - 0, Report MU - 0
2018-04-13 07:49:33 Tag Sent - 0, MU Sent – 0
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode