Siemens SCALANCE W1750D CLI - Hs2-Osu-Icon-Delete

CLI Commands
4.8 H
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
157
(scalance)(Hotspot2.0 "hs1")# no internet
(scalance)(Hotspot2.0 "hs1")# query-response-length-limit 5
(scalance)(Hotspot2.0 "hs1")# access-network-type chargeable-public
(scalance)(Hotspot2.0 "hs1")# roam-cons-len-1 3
(scalance)(Hotspot2.0 "hs1")# roam-cons-oi-1 123456
(scalance)(Hotspot2.0 "hs1")# roam-cons-len-2 3
(scalance)(Hotspot2.0 "hs1")# roam-cons-oi-2 223355
(scalance)(Hotspot2.0 "hs1")# addtl-roam-cons-ois 0
(scalance)(Hotspot2.0 "hs1")# venue-group business
(scalance)(Hotspot2.0 "hs1")# venue-type research-and-dev-facility
(scalance)(Hotspot2.0 "hs1")# pame-bi
(scalance)(Hotspot2.0 "hs1")# group-frame-block
(scalance)(Hotspot2.0 "hs1")# p2p-dev-mgmt
(scalance)(Hotspot2.0 "hs1")# p2p-cross-connect
(scalance)(Hotspot2.0 "hs1")# end
(scalance)# commit apply
The following commands associate
anqp-3gpp advertisement profile with a hotspot profile:
(scalance)(config)# hotspot hs-profile hs1
(scalance)(Hotspot2.0"hs1")# advertisement-protocol anpp
(scalance)(Hotspot2.0"hs1")# advertisement-profile anqp-3gpp 3gpp1
(scalance)(Hotspot2.0"hs1")# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and the hotspot profile con-
figuration sub- mode
4.8.18 hs2-osu-icon-delete
Description
This command deletes the specified OSU icon file downloaded in the AP.