Siemens SCALANCE W1750D CLI - Dynamic-Dns-Interval

CLI Commands
4.4 D
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
99
(scalance)# commit apply
Note
The colon (:) functions as an input separator in the shared secret key entry.
Command Information
AP Platform
Command Mode
All platforms
Configuration mode
4.4.17 dynamic-dns-interval
Description
This command configures a time interval at which the DNS updates are synced to the server.
Syntax
dynamic-dns-interval <ddns_interval>
Parameter
Description
dynamic-dns-interval
<ddns_interval>
Configures the time interval (in seconds) at which the DNS up-
dates are synced to the server. The default value is 12 hours.
Usage Guidelines
Use this command to set a time interval during which the DNS are periodically updated on
the server.
Example
The following example configures a DDNS time interval:
(scalance)(config)# dynamic-dns-interval 900
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode