Siemens SCALANCE W1750D CLI - Hotspot Anqp-Domain-Name-Profile

CLI Commands
4.8 H
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
123
Example
The following command configures a 3GPP profile:
(scalance)(config)# hotspot anqp-3gpp-profile cellcorp1
(scalance)(3gpp "cellcorp1")# 3gpp-plmn1 310026
(scalance)(3gpp "cellcorp1")# 3gpp_plmn2 208000
(scalance)(3gpp "cellcorp1")# 3gpp_plmn3 208001
(scalance)(3gpp "cellcorp1")# enable
(scalance)(3gpp "cellcorp1")# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and the 3GPP hotspot profile
configuration sub-mode
4.8.6 hotspot anqp-domain-name-profile
Description
This command defines the domain name to be sent in an ANQP information element in a
GAS query response.
Syntax
hotspot anqp-domain-name-profile <profile-name>
domain-name <domain-name>
enable
no…
Parameter
Description
hotspot anqp-domain-
name-profile
<profile-name>
Creates a domain profile.
domain-name <domain-
name>
Configures a domain name of the hotspot operator.
enable
Enables the configuration profile.
no…
Removes the existing configuration