Siemens SCALANCE W1750D CLI - Led-Off

CLI Commands
4.10 L
SCALANCE W1750D CLI
192 Function Manual, 03/2019, C79000-G8976-C452-04
Usage Guidelines
Use this command to enable, disable, and remove the static LACP configuration. When an
AP boots up, it forms the LACP according to the static configuration.
Example
The following example configures the static LACP for the AP.
(scalance)# lacp-mode enable
(scalance)# lacp-mode disable
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode
4.10.3 led-off
Description
This command disables LED display on an AP.
Syntax
led-off
no…
Command/Parameter
Description
led-off
Disables LED display.
no…
Re-enables LED display.
Usage Guidelines
Use this command to disable the LED display.
Example
The following example disables LED display on an AP:
(scalance)(config)# led-off