Siemens SCALANCE W1750D CLI - Page 661

CLI Commands
4.19 V
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
661
no...
Parameter
Description
vpn primary
<name>
Configures a FQDN for the main VPN or IPsec endpoint.
no…
Removes the VPN server configuration.
Usage Guidelines
Use this command to configure a primary VPN server for AP-VPN connections. When a
secondary VPN server is configured along with the primary server, you can enable the fast
failover feature that allows the AP to create a backup VPN tunnel to the controller along with
the primary tunnel, and maintain both the primary and backup tunnels separately.
Example
The following example configures a primary VPN server:
(scalance)(config)# vpn primary <name>
(scalance)(config)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms
Configuration mode