Siemens SCALANCE W1750D CLI - Page 650

CLI Commands
4.19 V
SCALANCE W1750D CLI
650 Function Manual, 03/2019, C79000-G8976-C452-04
Syntax
virtual-controller
country <country-code>
dnsip <addr>
ip <IP-address>
ipv6 <IPv6 address>
key <name>
vlan <virtual-controller-vlan> <virtual-controller-mask> <virtual-controller-
gateway>
no…
Parameter
Description
country <country-code>
Defines the country of operation of an AP. Slave APs obtain country
code configuration settings from the master AP.
dnsip <addr>
Configures the DNS IP address for the virtual controller.
ip <IP-address>
Assigns an IP address for the virtual controller.
ipv6 <IPv6 address>
Assigns an IPv6 address for the virtual controller.
key <name>
Defines a unique name for the virtual controller.
vlan <virtual-controller-
vlan>
Associates a VLAN ID with the virtual controller.
<virtual-controller-mask>
Configures a subnet mask for the virtual controller.
<virtual-controller-
gateway>
Configures a gateway for the virtual controller.
no…
Removes the configuration.
Example
The following example configures a country code for an AP:
(scalance)(config)# virtual-controller-country US
(scalance)(config)# end
(scalance)# commit apply
The following example configures a DNS IP address for the virtual controller:
(scalance)(config)# virtual-controller-dnsip 192.0.2.2
(scalance)(config)# virtual-controller-ip 192.0.2.2
(scalance)(config)# virtual-controller-ipv6 10.17.154.132
(scalance)(config)# virtual-controller-key
541a271a01f722ac28c1f8cfcbc4529021bcfb130d4e59ac93
(scalance)(config)# virtual-controller-vlan 1961 255.255.255.240 10.17.196.17
(scalance)(config)# end
(scalance)# commit apply