Siemens SCALANCE W1750D CLI - Page 35

CLI Commands
4.1 A
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
35
Parameter
Description
Range
Default
enable-guest-multicast
Allows the users to use the Bonjour or
DLNA services enabled in a guest VLAN.
When enabled, the Bonjour or DLNA de-
vices will be visible only in the guest VLAN
and AirGroup will not discover or enforce
policies in guest VLAN.
— —
multi-swarm
Enables inter cluster mobility. Whenena-
bled, the AP shares the mDNS database
information with the other clusters. The
AirGroup records in the Virtual Controller
can be shared with all the Virtual Control-
lers specified for L3 Mobility.
— Disabled
no…
Removes the configuration settings for
parameters under the airgroup command.
— —
no airgroup
Removes the AirGroup configuration.
—
—
Usage Guidelines
Use this command to configure the AirGroup, the availability of the AirGroup services, and
ClearPass Policy Manager servers.
Example
The following example configures an AirGroup profile:
(scalance)(config)# airgroup
(scalance)(airgroup)# enable
(scalance)(airgroup)# cppm enforce-registration
(scalance)(airgroup)# cppm-server Test
(scalance)(airgroup)# cppm-query-interval 10
(scalance)(airgroup)# enable-guest-multicast
(scalance)(airgroup)# multi-swarm
(scalance)(airgroup)# end
(scalance)# commit apply
Command Information
AP Platform
Command Mode
All platforms Configuration mode and AirGroup configuration
sub-mode.