CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
609
Example
The following example shows the output displayed for show vpn config command:
Concentrator
------------
Type Value
---- -----
VPN Primary Server
VPN Backup Server
VPN Preemption disable
VPN Fast Failover disable
VPN Hold Time 600
VPN Monitor Pkt Send Freq 5
VPN Monitor Pkt Lost Cnt 2
VPN Ikepsk
VPN Username
VPN Password 95a5624fbf08dfb3e794ac2c6686e330
GRE outside vpn disable
GRE Server
GRE IP Address 0.0.0.0
GRE Type 1
GRE Per AP Tunnel disable
Reconnect User On Failover disable
Reconnect Time On Failover 60
Routing Table
-------------
Destination Netmask Gateway Type
----------- ------- ------- ----
The output displayed for this command provides information on the parameters configured
for the VPN concentrator.
For more information on the VPN configuration parameters, see the following commands:
● vpn primary
● vpn backup
● vpn preemption
● vpn fast-failover
● vpn gre-outside