Siemens SCALANCE W1750D CLI - Page 516

CLI Commands
4.16 S
SCALANCE W1750D CLI
516 Function Manual, 03/2019, C79000-G8976-C452-04
Syntax
show ip igmp group [maddr <multicast-addr>]
Parameter
Description
maddr <multicast-
addr>
Filters group table information based on the multicast IP address.
Usage Guidelines
Use this command to view the IGMP group table information for an AP.
Example
The following output is displayed for the show ip igmp group command:
IGMP Group Table
----------------
Group
Members
vlan
239.255.255.250
1
333
224.0.0.251
1
333
224.0.0.252
1
333
The following output is displayed for the show ip igmp group maddr <multicast-addr>
command:
IGMP Group 224.0.0.251 Table
--------------------------------
Member
Mac
Vlan
Destination
Age
------
---
----
-----------
---
10.17.88.226
08:ed:b9:e1:51:7d
333
siemens002
15
The output of this command includes the following parameters:
Paramter
Description
IGMP Group Table
Displays details for the IGMP multicast group.
Group
Indicates the IP addresses for the multicast group.
Members
Indicates the number of members assigned to the multicast group.
VLAN
Indicates the VLAN ID associated with the multicast group.
IGMP Group
<multicast- address> Table
Displays the IGMP details specific to a multicast address.
Member
Indicates the IP address of the member associated with the speci-
fied multicast group address.
MAC
Indicates the MAC address of member associated with the speci-
fied multicast group address.
VLAN
Indicates the VLAN ID associated with the multicast groups or a
specific multicast group address.
Destination
Indicates the destination to which the multicast packets are routed.
Age
Indicates the aging time of the forwarding table entries.