Siemens SCALANCE W1750D CLI - Page 197

CLI Commands
4.11 M
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
197
no…
Parameter
Description
managed-mode-profile
Configures the managed-mode-profile for automatic configuration.
automatic
Enabled the automatic mode to automatically generate the user creden-
tials based on AP MAC address.
config-filename
<file_name>
Filename
Indicates filename within the alphanumeric format. Ensure that configura-
tion file name does not exceed 40 characters.
download-method
<method>
Denotes the method used for downloading configuration files (FTP or
FTPS).
server <server_name>
Denotes the name of the server or the IP address of the server from
which the configuration file must be downloaded.
sync-time day <dd>
hour <hh> min
<mm> window <window>
Configures the day and time at which the APs can poll the configuration
files from the server.
•
day <dd>— Indicates day, for example to configure Sunday as the
day, specify 01. To configure the synchronization period as everyday,
enter 00.
•
hour <hh>—Indicates hour within the range of 0-23.
•
min <mm>—Indicates minutes within the range of 0-59.
•
window <hh>—Defines a window for synchronization of the configura-
tion file. The default value is 3 hours.
retry-poll-period
<time-in-sync>
Configures the time interval in minutes between two retries, after which
APs can retry downloading the configuration file
username <username>
password <password>
Denotes the user credentials set by the user to enable automatic configu-
ration.
no…
Removes the configuration.
Usage Guidelines
Use this command to enable automatic configuration of the APs in the management mode.
The following checks must be performed before the configuration:
● Ensure that the APs running SCALANCE W 8.3.0.x or later release version.
● When the APs are in the management mode, ensure that the APs are not managed by
AirWave.
Example
The following example configures an AP for automatic configuration:
(scalance)(config)# managed-mode-profile
(scalance)(managed-mode-profile)# username <username>
(scalance)(managed-mode-profile)# password <password>
(scalance)(managed-mode-profile)# config-filename instant.cfg
(scalance)(managed-mode-profile)# download-method ftps