Siemens SCALANCE W1750D CLI - Page 134

CLI Commands
4.8 H
SCALANCE W1750D CLI
134 Function Manual, 03/2019, C79000-G8976-C452-04
Parameter
Description
Range
Default
venue-group
<group>
Configures one of the following
venue groups to be advertised in
the IEs from APs associated with
this hotspot profile.
• assembly
• business
• educational
• factory-and-industrial
• institutional
• mercantile
• outdoor
• residential
• storage
• utility-and-misc
• vehicular
NOTE:
This parameter only defines
the venue group advertised in the
IEs from hotspot APs. To define the
venue group to be included in
ANQP responses, use
anqp-venue-
name- profile <profile-name>
command.
assembly, business, educa-
tional,
factory-and-industrial, insti-
tutional, mercantile,
outdoor, residential, stor-
age, unspecified, utility-and-
misc, vehicular
unspecified
venue-lang-code
<language>
Configures an ISO 639 language
code that identifies the language
used in the Venue Name field.
— —
venue-name
<name>
Configures the venue name to be
advertised in the ANQP IEs. If the
venue name includes spaces,
the name must be enclosed in
quotation marks, e.g. “Midtown
Shopping Center”.
— —
venue-type
<type>
Specifies the venue type
to be advertised in the IEs.
The complete list of sup-
ported venue types is de-
scribed in hotspot anqp-
venue-name- profile.
unspecified
no…
Removes any existing configura-
tion.
— —
Usage Guidelines
Use this command to configure the venue group and venue type in an ANQP Venue Name
profile. If a client uses the GAS to post an ANQP query to an Access Point, the AP will return
ANQP Information Elements with the values configured in this profile.