Siemens SCALANCE W1750D CLI - Page 154

CLI Commands
4.8 H
SCALANCE W1750D CLI
154 Function Manual, 03/2019, C79000-G8976-C452-04
ANQP Information Elements
ANQP Information Elements (IEs) are additional data that can be sent from the AP to the
client to identify the AP’s network and service provider. If a client requests this information
via a GAS query, the hotspot AP then sends the ANQP Capability list in the GAS Initial
Response frame indicating support for the following IEs:
●
Venue Name - Defined using the hotspot anqp-venue-name-profile command.
●
Domain Name: Defined using the hotspot anqp-domain-name-profile command.
●
Network Authentication Type: Define using the hotspot anqp-nwk-auth-profile command.
●
Roaming Consortium List: Defined using the hotspot anqp-roam-cons-profile command.
●
NAI Realm: Defined using the hotspot anqp-nai-realm-profile command.
●
Cellular Network Data: Defined using the hotspot anqp-3gpp-nwk-profile command.
●
Connection Capability: Defined using the hotspot h2qp-conn-capability-profile command.
●
Operator Class: Defined using the hotspot h2qp-op-cl-profile command.
●
Operator Friendly Name: Defined using the hotspot h2qp-operator-friendly-name-profile
command.
●
WAN Metrics: Defined using the hotspot h2qp-wan-metrics-profile command.
Roaming Consortium OIs
Organization Identifiers (OIs) are assigned to service providers when they register with the
IEEE registration authority. You can specify the OI for the hotspot’s service provider in the
ANQP Roaming Consortium profile using the
hotspot anqp-roam-cons-profile command.
This Hotspot profile also allows you to define and send up to three additional roaming
consortium OIs for the service provider’s top three roaming partners. To send this additional
data to clients, you must specify the number of roaming consortium elements a client can
query using the
addtl-roam-cons-ois <1-3> parameter, then define those elements using the
following parameters:
●
roam-cons-oi-1 and roam-cons-len 1
●
roam-cons-oi-2 and roam-cons-len 2
●
roam-cons-oi-3 and roam-cons-len 3
The configurable values for each additional OI include the Organization Identifier itself, the
OI length, and the venue group and venue type associated with those OIs.
Venue Types
The following list describes the different venue types for each venue group:
Venue Group
Associated Venue Type Value
unspecified
The associated numeric value is 0.
—