Siemens SCALANCE W1750D CLI - Page 162

CLI Commands
4.9 I
SCALANCE W1750D CLI
162 Function Manual, 03/2019, C79000-G8976-C452-04
detect-windows-bridge
detect-wireless-bridge
detect-wpa-ft-attack
infrastructure-detection-level <type>
infrastructure-protection-level <type>
protect-adhoc-network
protect-ap-impersonation protect-ssid
protect-valid-sta protect-windows-bridge
rogue-containment
signature-airjack
signature-asleap
signature-deassociation-broadcast
signature-deauth-broadcast
wired-containment
wired-containment-ap-adj-mac
wired-containment-susp-l3-rogue
wireless-containment <type>
no…
no ids
Parameter
Description
Range
Default
ids
Creates an IDS policy
—
—
client-detection-
level
<type>
Sets the client detection level. off, low, me-
dium, high
off
client-protection-
level
<type>
Sets the client protection level. off, low, me-
dium, high
off
detect-adhoc-
network
Enables detection of adhoc networks. — —
detect-ap-flood
Enables detection of flooding with fake AP
beacons to confuse the legitimate users and
to increase the amount of processing need-
ed on client operating systems.
— —
detect-ap-
impersonation
Enables detection of AP impersonation. In
APimpersonation attacks, the attacker sets
up an AP tha tassumes the BSSID and
ESSID of a valid AP. AP impersonation
attacks can be done for man-in-the-middle
attacks, a rogue AP attempting to bypass
detection, or a honeypot attack.
— —
detect-ap-spoofing
Enables AP Spoofing detection. — —