CLI Commands
4.9 I
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
165
Enables protection of valid stations. When
enabled valid stations are not allowed to
connect to an invalid AP.
— —
bridge
Enables protection of a windows station
— —
Controls Rogue AIPs. When rogue APs are
detected, they are not automatically disa-
bled.
This option automatically shuts down rogue
APs. When this option is enabled, clients
attempting to associate to an AP classified
as a rogue are disconnected through a de-
— —
Enables signature matching for the AirJack
— —
Enables signature matching for the ASLEAP
— —
deassociation-
Configures signature matching for the deas-
sociation broadcast frame type.
— —
broadcast
Configures signature matching for the
deauth broadcast frame type.
— —
ap-adj- mac
Enables a wired containment to Rogue APs
whose wired interface MAC address is offset
by one from its BSSID.
— —
susp-l3- rogue
Enables the user to identify and contain an
AP with a preset wired MAC address that is
different from the BSSID of the AP if the
MAC address that the AP provides to wire-
less clients as the Gateway MAC is offset by
one character from its wired MAC address.
Enable this feature only when the specific
containment is needed, to avoid a false
— —
containment
<type>
Enable wireless containment including Tar-
pit Shielding.
Tarpit shielding works by steering a client to
a tarpit so that the client associates with it
instead of the AP that is being contained.
deauth-only— Enables Containment using
deauthentication only.
none— Disables wireless containment.
tarpit-all-sta—Enables wireless containment
by tarpit of all stations.
tarpit-non-valid-sta— Enables wireless con-
tainment by tarpit of non-valid clients
deauth- only,
none, tarpit-
all-sta, tarpit-
non- valid-sta
deauth-only
To Next Page
Loading...
