Siemens SCALANCE W1750D CLI - Page 176

CLI Commands
4.9 I
SCALANCE W1750D CLI
176 Function Manual, 03/2019, C79000-G8976-C452-04
Parameter
Description
Range
Default
payloadContent
Content of the messages sent to the
IoT management server. The follow-
ing payload options are supported:
•
managed-beacons
Beacon management data.
•
managed-tags
asset tag RSSI data
•
zf-tags
zF tag data
•
all
all the BLE device data
•
enocean-sensors
EnOcean sensor device data
•
enocean-switches
EnOcean switch device data
•
ibeacons
iBeacon device data
•
unclassified
Raw data of the BLE chip
•
eddystone
Eddystone device data.
— —
rssiReporting
<type>
Sets the preferred format for RSSI
reporting.
— average
uidNamespaceFilter
<filter>
A list of UID namespaces to filter
devices included in the reports.
Applies only Eddystone- UID devic-
es. You can specify a maximum of
10 namespaces
— —
urlFilter <filter>
A list of URL strings to filter devices
included in the reports. Applies only
to Eddystone-URL devices. The
string listed here can be partial URL
strings. You can specify a maximum
of 10 URL strings.
— —
transportInterval
<interval>
AP IoT data interval in seconds. 5 to 3600 sec-
onds
—
username <user>
Endpoint user name.
—
300 seconds
no…
Removes any existing configuration.
—
—
Usage Guidelines
Use this command to create or modify an IoT transport profile.