Siemens SCALANCE W1750D CLI - Page 241

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
241
any
any
IPv4 / 6
match
https
any
any
IPv4 / 6
match
any
Action
Log
TOS
802.1P
Blacklist
App Throttle
(Up:Down)
Mir-
ror
DisScan
-------
---
---
-------
--------
---------------------
------------
-----
-
------
ermit
permit
permit
ClassifyMedia time-range
------------- ---------
ClassifyMedia
ClassifyMedia
ClassifyMedia
Vlan Id :0
ACL Captive Portal:disable
ACL ECP Profile :default
CALEA :disable
Redirect Blocked HTTPS Traffic :disable
DPI error page URL:
Bandwidth Limit :downstream disable upstream disable
The output of this command displays information about the access rule parameters
configured for a specific wired or wireless profile. It indicates whether a particular type of
traffic is allowed to a particular destination, and the service and protocol in use and if options
such as logging and prioritizing traffic are enabled when the rule is triggered. If the DPI
access rules are configured, it displays the list of rules configured to allow or deny access to
certain applications, application categories, web categories, and websites based on their
reputation score.
Command Information
AP Platform
Command Mode
All platforms
Privileged EXEC mode