Siemens SCALANCE W1750D CLI - Page 301

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
301
Syntax
show ap debug airwave
Usage Guidelines
Use this command to view the list of AirWave servers configured for an AP.
Example
The following example shows the output of show ap airwave command
Airwave Server List
-------------------
Domain/IP Address
Type
Mode
Con-
fig
-
only
Rap-
ids
-
mode
Sta-
tus
-----------------
----
----
-----
-----
-
-----
-----
-
-----
-
securelogin.arubanetworks.com
Primary
-
-
No
Airwave Server List
-------------------
Domain/IP Address
Type
Mode
Con-
fig
-
only
Rap-
ids
-
mode
Status
-----------------
----
----
-----
-----
-
-----
-----
-
------
70:3a:0e:cc:ee:b2#
70:3a:0e:cc:ee:b2# show ap debug am-config Radio Configu-
ration for wifi0
-----------------------------
Parameter
Value
---------
-----
Preferred Channel
108
Tx Power
27.0
VHT Enabled
1
Radio Configuration for wifi1
-----------------------------
Parameter
Value
---------
-----
Preferred Channel
1
Tx Power
24.0
VHT Enabled
0
ARM Configuration for wifi0
----------------------------
Parameter
Value
---------
-----