Siemens SCALANCE W1750D CLI - Page 322

CLI Commands
4.16 S
SCALANCE W1750D CLI
322 Function Manual, 03/2019, C79000-G8976-C452-04
Example
The following example shows the output of the show ap debug ble-config command:
(scalance)# show ap debug ble-config BLE Configuration
-----------------
Item
Value
----
-----
BLE Supported
USB
BLE HW Type
LS-BT1USB
Master IP
10.65.66.14
Authorization Token eyJhbGciOi-
JIUzI1NiIsInR5cCI6IkpXVCJ9.eyJsIjo1NzQxMzEyNTI3NTY0ODAwLCJ0IjoxNDk4MTE0MTEzfQ.071Uda
25uzup9w61wJUgsJVuC8qOrMBH3KHbwhlktPE
Endpoint URL
https://edit.meridianapps.com/api/beacons/man
age
BLE Ready
Yes
Beacon Mgmt Update Intvl (in sec)
60
APB Info Update Intvl (in sec)
103 (3092/3010)
BLE debug log
Enabled
Operational Mode
Beaconing (APB: Beaconing)
AP USB Power Override
Disabled (-1)
Uplink Status
Up (APB: -NA-)
APB Connection Status
0
Last BLE Device Update Attempted
8c:8b:83:3d:72:6c
Last AP to APB Message Time
2017-09-06 03:07:59
Last Update to Endpoint Time
No Update Sent
Log Levels Available
{ All(0xffff), Info(0x04), Warning(0x02),
Error(0x01), Ageout(0x08), BMReq(0x10),
FW-
Upgrade(0x20), FW
-UpgradeErr(0x40),
CfgUpdate(0x80), CfgUpdateErr(0x100), Bea-
con(0x200), BcnTLV(0x400), BcnErr(0x800),
APB(0x1000), AssetUpdate (0x2000), None(0x00)
}
Current Log Level
{ 0x61 : Error(0x0001), FW-Upgrade(0x0020),
FW-UpgradeErr (0x0040) }
Log Mac Filter
None
Bundled BluOS Images
Bank A(/aruba/bin/UpgradeImage_Nano_OAD-
A_1.2
-19.bin) Bank
B(/aruba/bin/Beacon Nano OAD-B 1.2-19.bin)
-----------------
BLE IoT Transport Context Configuration #0
Config ID: 4
----------------------------------------
---------------
Item
Value
----
-----
Endpoint Type
0 (Meridian Beacon Management)
Interval
30
Content
0 (Managed Beacons)