Siemens SCALANCE W1750D CLI - Page 486

CLI Commands
4.16 S
SCALANCE W1750D CLI
486 Function Manual, 03/2019, C79000-G8976-C452-04
allowed unclassified session in 10 secs (max=0) 0
unclassified dpi session in 10 secs 8
total number of unclassified session 406
show dpi debug status
The following example shows the output of the
show dpi debug status command:
Dpimgr Running :TRUE
Dpimgr Hello count 1
Dpimgr Agent :All set - App, Webcc & URL
Dpimgr Status value :0x3b
Dpimgr Platform Status :App + WebCC + URL
Dpimgr Visibility Status :App + WebCC
Dpimgr Enforcement Status :None
Dpimgr External Visibility Status :None
Dpimgr BCA Proxy Connection :Established
Dpimgr BCA Server SSL Established :True
Dpimgr BCA Server Reachable :Unknown
The output of this command includes the following parameters:
Parameter
Description
Dpimgr Running
Displays the current state of the DPIMGR process.
Dpimgr Hello count
Denotes the number of times the DPIMGR process has restarted
and completed initialization.
Dpimgr Agent
Displays the DPIMGR components that are currently running.
Dpimgr Status value
Denotes the DPIMGR configuration flags set.
Dpimgr Platform Status
Denotes the DPIMGR configuration that the current platform can
support.
Dpimgr Visibility Status
Displays the DPIMGR components that are configured for visibility.
Dpimgr Enforcement Status
Denotes if the DPIMGR statistics are reported to ALE and AMP
Dpimgr External Visibil-
ity Status
Denotes the DPIMGR components that are configured for enforce-
ment.
Dpimgr BCA Proxy Connec-
tion
Indicates if a connection is established between the AP and the
proxy server. This parameter has 4 states:
• Configured—Denotes that the proxy configuration is present.
• Not Configured—Denotes that the proxy configuration is not
present.
• Established—Denotes that a TCP connection has been estab-
lished between the AP and the BCA proxy server.
• Failure—Denotes a failure in establishing a TCP connection
between the AP and the BCA proxy server.