CLI Commands
4.18 U
SCALANCE W1750D CLI
640 Function Manual, 03/2019, C79000-G8976-C452-04
Syntax
upgrade-image
upgrade-image2
upgrade-image2-no-reboot
upgrade-image2-no-switch-partition-reboot
{<url>[/ftp | /tftp | /http]}
Upgrades the AP to use a new image.
Uploads an additional image file and upgrades the AP to use this im-
age file when required. You can also use this command to upgrade
images for multi-class AP cluster.
reboot
Uploads an image file and upgrades the AP to use the new image
without rebooting the APs.
upgrade-image2-no-
switch-partition-reboot
Uploads an additional image file into the backup partition
Allows you to specify the FTP, TFTP, or HTTP URL.
Usage Guidelines
Use these commands to upgrade an AP to use an image file uploaded from the FTP or
TFTP server, or by using an HTTP URL. Before uploading an image file, ensure that you
have the appropriate image file for your AP.
● For SCALANCE W— Siemens_Hercules_8.4.0.x_xxxx
Example
The following examples upgrade an AP by using an image file from the FTP server:
(scalance)# upgrade-image ftp://192.0.2.7/Siemens_Hercules_8.4.0.x_xxxx
(scalance)# upgrade-image2-no-reboot ftp://192.0.2.7/Siemens_Hercules_8.4.0.x_xxxx
To upgrade images for a multi-class AP cluster:
(scalance)# upgrade-image2
Orion@tftp://192.168.0.1/mips32.ari;Cassiopeia@tftp://192.168.0.1/armv5te.ari
Command Information
To Next Page