6 Convenient Functions
6.2 Parallel Shift Function
6-11
149235-1CD
RE-CSO-A031
Operation Explanation
1 Move the cursor to the line
immediately before where the
MSHIFT instruction is to be
registered.
2 Press [INFORM LIST]. The instruction list dialog box appears.
3 Select {SHIFT}.
4 Select the MSHIFT instruction. The MSHIFT instruction is displayed in the input buffer line.
5 Change the number data or
additional items as required.
<When Nothing is to be Changed>
Proceed to Step 6.
<When Editing Additional Items>
• Adding or modifying additional items
To change the position variable number, move the cursor to the
position variable number and press [SHIFT] + the cursor key to
increase or decrease the value.
To directly input the value using the Numeric keys, press
[SELECT] to display the input buffer line.
After the number is input, press [ENTER] to modify the number
value in the input buffer line.
0003 MOVJ VJ=10.00
0004 GETS PX001 $PX000
0005 END
Line immediately
before where
MSHIFT instruction
is registered.
IN/OUT
CONTROL
DEVICE
MOTION
ARITH
SHIFT
OTHER
SAME
PRIOR
SFTON
SFTOF
MSHIFT
MSHIFT PX000 BF PX001 PX002
PX =
MSHIFT 0 BF PX001 PX002
To Next Page
Loading...
Need help?
General
