YASKAWA NX100 User Manual

6 Convenient Functions
6.4 PAM Function
6-40
149235-1CD
RE-CSO-A031
Copying Data
To input the same data as those set previously, perform the following operation.
Operation Explanation
1 Move the cursor to the line to
be copied.
2 Select {EDIT} under the menu. The pull-down menu appears.
3 Select {LINE COPY} under the
pull-down menu.
4 Move the cursor to the line
where the item is to be copied.
5 Select {EDIT} under the menu.
6 Select {LINE PASTE}. The desired data is copied to the line. However, if the line where
the data is to be copied does not have a speed value or PL value,
it cannot be copied.
PAM
STEP X(mm) Y(mm) Z(mm) Rx(deg) Ry(deg) Rz(deg) V(%) PL
007
008
009
010
011
012
013
014
015
016
10.00
10.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
5.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
5.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
0.00
-
-
-
-
-
-
-
-
-
-
TEST R1
JOB
STATUS
INPUT COORD
COMPLETE
Main Menu
CANCEL
ShortCut
DATA
EDIT
DISPLAY
UTILITY
LINE PASTE
LINE CLEAR
LINE COPY
237 of 493

YASKAWA NX100 Specifications

General

Manufacturer	YASKAWA
Model	NX100
Operating Temperature	0 to 45°C
Humidity	20 to 80% RH (non-condensing)
Communication Interfaces	Ethernet
Safety Standards	ISO 10218-1
Power Supply	200-230V AC, 50/60Hz
Storage Temperature	60°C