Hardware slot where the process for which the trace level is
set, is running. Options include:
• number—Number of the SIP slot of the hardware
module where the trace level is set. For instance, if you
want to specify the SIP in SIP slot 2 of the switch, enter
2.
• SIP-slot / SPA-bay—Number of the SIP switch slot and
the number of the shared port adapter (SPA) bay of that
SIP. For instance, if you want to specify the SPA in bay
2 of the SIP in switch slot 3, enter 3/2.
• F0—The Embedded-Service-Processor in slot 0.
• FP active—The active Embedded-Service-Processor.
• R0—The route processor in slot 0.
• RP active—The active route processor.
• switch <number> —The switch with its number
specified.
• switch active—The active switch.
• switch standby—The standby switch.
slot
Module within the process for which the tracing level is set.
module
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
987
set platform software trace
To Next Page
Loading...
