Siemens SCALANCE W1750D CLI - Page 149

CLI Commands
4.8 H
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
149
Parameter
Description
Range
Default
access-network-
type <type>
Configures any of the following access network
(802.11u network type) type:
•
private
—This network is accessible for authorized
users only. For example, home networks or enter-
prise networks that require user authentication.
The corresponding integer value for this network
type is 0.
•
private-with-guest
—This network is accessible to
guest users based on guest authentication
methods. For example, enterprise networks that
allow guest users with captive portal authentica-
tion. The corresponding integer value for this net-
work type is 1.
•
chargeable-public
— This network provides access
to the Internet based on payment. For example, a
subscription-based Internet access in a coffee
shop or a hotel offering chargeable in- room Inter-
net access service. The corresponding integer
value for this network type is 2.
•
free-public
—This network is accessible to all with-
out any charges applied. For example, a hotspot
in airport or other public places that provide Inter-
net access with no additional cost. The corre-
sponding integer value for this network type is 3.
•
personal-device
—This network is accessible for
personal devices. For example, a laptop or
camera configured with a printer f
or the purpose of
printing. The corresponding integer value for this
network type is 4.
•
emergency-services
—This network is limited to
accessing emergency services only. The corre-
sponding integer value for this network type is 5.
•
test
—This network is used for test purposes only.
The corresponding integer value for this network
type is 14.
•
wildcard
—This network indicates a wildcard net-
work. The corresponding integer value for this
network type is 15.
private, private- with-
guest, chargeable-
public, free- public,
personal- device,
emergency- services,
test, wildcard
chargeable-
public
addtl-roam-cons-
ois
<addtl-roam-
cons-ois>
Configures the number of additional roaming consor-
tium OIs advertised bythe AP. This feature supports
up to three additional OIs, which are defined using the
roam-cons-oi-1, roam-cons-oi-2 and roam-cons-oi-3
parameters.
— —