CLI Commands
4.8 H
SCALANCE W1750D CLI
150 Function Manual, 03/2019, C79000-G8976-C452-04
profile
{anqp-3gpp-
profile
|anqp-domain-
name-profile
|anqp-ip-addr--
profile
|anqp-nai-realm-
profile
|anqp-nwk-auth-
profile |anqp-
roam-cons-
profile
|anqp-venue-
name-profile
|h2qp-conn-cap-
profile
|h2qp-oper-
class-profile
|h2qp-osu-
provider-profile
|h2qp-oper-name-
profile
|h2qp-wan-
metrics-profile}
Associates an advertisement profile with the hotspot
profile.
You can associate any of the following advertisement
profiles:
• anqp-3gpp-profile
• anqp-domain-name-profile
• anqp-ip-addr--profile
• anqp-nai-realm-profile
• anqp-nwk-auth-profile
• anqp-roam-cons-profile
• anqp-venue-name-profile
• h2qp-conn-cap-profile
• h2qp-oper-class-profile
• h2qp-osu-provider-profile
• h2qp-oper-name-profile
• h2qp-wan-metrics-profile
— —
Allows you to associate a specific advertisement
profile to the hotspot profile.
— —
protocol
Configures the
: Access Network Query Protocol
(ANQP) advertisement protocol.
anqp —
Indicates if any additional steps are required for
network access.
— —
By default, ANQP information is obtained from a GAS
Request and Response. If you enable the comeback-
mode option, advertisement information is obtained
using a GAS Request and Response. as well as a
Comeback-Request and Comeback-Response. This
option is disabled by default.
— —
Enables the hotspot profile.
delay
<delay>
Configures a GAS comeback delay interval after
which the client can attempt to retrieve the query
response using a Comeback Request Action frame.
100—2000
milliseconds
500
block
Configures the Downstream Group Addressed For-
warding (DGAF) Disabled Mode. This feature ensures
that the AP does not forward downstream group-
addressed frames. It is disabled by default, allowing
the AP to forward downstream group-addressed
— —
Configures a homogenous ESS identifier (HESSSID) MAC address in
colon-separated
—
Allows the AP to send an
Information Element indicating that the network allows
the Internet access. By default, a hotspot profile does
not advertise network internet access.
— —
Removes any existing configuration.