Siemens SCALANCE W1750D CLI - Page 335

CLI Commands
4.16 S
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
335
SLB: Probe Requests Ignored
0
SLB: Auth Requests Refused
0
SLB: Assoc Requests Refused
0
Hotspot2 Action Frame From STM
0
Hotspot2 Action TX Prepare
0
Hotspot2 Action Skip Crypto
0
Hotspot2 Action Process Action
0
Hotspot2 Action TXOP ok
0
Hotspot2 Action DMA ok
0
Hotspot2 Action Frame Drop 1
0
Hotspot2 Action Frame Drop 2
0
Hotspot2 Action Frame Drop 3
0
Hotspot2 Action Frame Drop 4
0
Hotspot2 Action Frame Drop 5
0
Hotspot2 Action Frame Drop 6
0
Hotspot2 Action Frame Drop 7
0
Hotspot2 Action Frame Drop 8
0
Smart Antenna Status
0
Smart Antenna Last-train time
0
Smart Antenna Re-train by time
0
Smart Antenna Re-train by PER
0
Smart Antenna Current Pattern
The output of this command includes the following information:
Parameter
Description
Frames Rcvd For TX
Shows the number of frames received for transmission.
Tx Frames Dropped
Shows the number of transmission frames that were dropped.
Frames Transmitted
Shows the number of frames successfully transmitted.
Success With Retry
Shows the number of frames that were transmitted after being retried.
Tx Mgmt Frames
Shows the number of management frames transmitted.
Tx Probe Responses
Shows the number of transmitted probe responses.
Tx Data Frames
Shows the number of transmitted data frames.
Tx CTS Frames
Shows the number of clear-to-sent (CTS) frames transmitted.
Dropped After Retry
Shows the number of frames dropped after an attempted retry.
Dropped No Buffer
Shows the number of frames dropped because the AP’s buffer was full.
Missed ACKs
Shows the number of missed acknowledgements (ACKs)
Long Preamble
Shows the number of frames sent with a long preamble.
Short Preamble
Shows the number of frames sent with a short preamble.
Tx EAPOL Frames
Shows the number of Extensible Authentication Protocol over LAN
(EAPOL) frames transmitted.
Tx <n> Mbps
Shows the number of frames transmitted at <n> Mbps, where <n> is a
value between 6 and 300.
Tx WMM
Shows the number of Wi-Fi Multimedia (WMM) packets transmitted for
the following access categories. If the AP has not transmitted packets in a
category type, this data row will not be displayed in the output of the
command.
Tx WMM [BE]:
Best Effort
Tx WMM [BK]:
Background
Tx WMM [VO]:
VoIP
Tx WMM [VI]: Video