Siemens SCALANCE W1750D CLI - Page 378

CLI Commands
4.16 S
SCALANCE W1750D CLI
378 Function Manual, 03/2019, C79000-G8976-C452-04
Parameter
Description
containment-info
Shows containment events and counters triggered by the wired contain-
ment and wireless containment features configured in the ids. The output
of this command shows device and target data for wired containment
activity, as well as data for the following counters. Wireless Containment
Counters:
• Last Deauth Timer Tick
• Deauth frames to AP
• Deauth frames to Client
• Last Tarpit Timer Tick
• Tarpit Frames: Probe Response
• Tarpit Frames: Association Response
• Tarpit Frames: Authentication
• Tarpit Frames: Data from AP
• Tarpit Frames: Data from Client
• Last Enhanced Adhoc Containment Timer Tick
• Enhanced Adhoc Containment: Frames To Data Sender
• Enhanced Adhoc Containment: Frames To Data Receiver
• Enhanced Adhoc Containment: Response to Request
Enhanced Adhoc Containment: Replay Response Wired Containment
Counters:
• Last Wired Containment Timer Tick
• Last Tagged Wired Containment Timer Tick
• Spoof frames sent
• Spoof frames sent on tagged VLAN
enet-wired-mac
Shows Wired MAC Addresses learned.
ids-state <type>
Shows IDS State.