CLI Commands
4.16 S
SCALANCE W1750D CLI
426 Function Manual, 03/2019, C79000-G8976-C452-04
essid
73 72 6f 79 2d 73 6f 6d 65 74 68 69 6e 67 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00
auth_failure_count 00
acl
00 8a
acct_session
swarm_basic_client_t
08 ed b9 e1 51 7d d8 c7 c8 3d 3d 52 0a 11 58 ba 73 72 6f 79 2d 73 6f 6d 65 74 68 69
6e 67 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 8a a9 fe 5a 9a 03 e8 00
00
checksum
02 ec ba ec
The
show checksum <mac> command displays the checksum errors associated with the AP
clients.
show clients debug and show clients wired debug
The
show clients debug command displays detailed information about the clients MAC and
IP addresses, client role, authentication aging time, and accounting intervals, ESSID and
BSSID details, VLAN and multicast groups to which the client is associated, and DHCP roles
and options associated with the client. The
show clients wired debug command displays a
similar output.
The following example shows the
show clients debug command output:
Client List
-----------
Access Point
------------
2001:470:36:5c3:ffff:ffff:ffff:
64
Reauth Interval Reauth ESSID Auth Type Authenticated DEL Age Vlan ESSID
---------------- ------------- --------- -------------- --- --- ---- ------
To Next Page
Loading...
