Siemens SCALANCE W1750D CLI - Page 691

CLI Commands
4.20 W
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
691
url <url>
no…
no wlan external-captive-portal
Command/Parameter
Description
Range
Default
wlan external-
captive- portal
[profile-name]
Creates an external captive portal profile.
You can create multiple external captive portal
profiles and apply to an SSID or a wired profile.
— —
auth-text <text>
Configures the authentication text to be returned
by the external server.
The authentication text command configuration
is required only for the External - Authentication
Text splash mode.
— —
auto-whitelist-
disable
Disables automatic whitelisting of URLs. — —
https
Enables HTTPS for client connections.
—
—
Port <port>
Configures the port to use for communication
with the external captive portal server.
— 80
prevent-frame-
overlay
Prevents overlay of frames. when configured, a
frame displays a page only if it is in the same
domain as the main page.
— —
redirect-url
<redirection-url>
Configures a URL to redirect the users after a
successful authentication.
NOTE:
By default, after entering the requested
info at the splash page, the users are redirected
to the URL that was originally requested. When
a URL is configured for redirection, it overrides
the user’s original request and redirects them to
URL configured for redirection.
— —
out-of-service-page
<url>
Configures a URL to redirect the users when the
internet uplink is down.
— —
server <server-
name>
Configures the external captive portal server. — —
server-fail-through
Allows the guest clients to access the Internet
when the external captive portal server is not
available.
— Disabled
switch-ip
Sends the Virtual Controller's IP address in the
redirection URL when external captive portal
servers are used.
— Disabled
server-offload
Enables the server-offload feature to reduce the
load on the external captive portal server by
allowing the AP to use a Meta tag to redirect
HTTP and HTTPS requests from the client.
When enabled, this feature prevents the non-
browser client applications from following un-
necessary 302- redirects generated by their
background HTTP or HTTPS requests.
— —
url <url>
Configures the URL of the external captive por-
tal server.
— —