Siemens SCALANCE W1750D CLI - Page 692

CLI Commands
4.20 W
SCALANCE W1750D CLI
692 Function Manual, 03/2019, C79000-G8976-C452-04
Command/Parameter
Description
Range
Default
no…
Removes the definition of the following parame-
ters configured under the
wlan external- captive-
portal
command.
• auto-whitelist- disable
• https
• out-of-service-page
• prevent-frame-overlay
• server-fail-through
• server-offload
• switch-ip
— —
no wlan external-
captive-portal
Removes the external captive portal configura-
tion.
— —
Usage Guidelines
Use this command to configure external captive portal profiles for guest users. When the
captive portal profile is applied to an SSID or a wired profile, the users connecting to the
SSID or wired network are assigned a role with the captive portal rule. You can create up to
8 external captive portal profiles.
Example
The following example configures external captive portal splash page:
(scalance)(config)# wlan external-captive-portal AuthText1
(scalance)(External Captive Portal "AuthText1")# auth-text authenticated
(scalance)(External Captive Portal "AuthText1")# port 80
(scalance)(External Captive Portal "AuthText1")# redirect-url http://www.example1.com
(scalance)(External Captive Portal "AuthText1")# out-of-service-page
http://www.example2.com
(scalance)(External Captive Portal "AuthText1")# server CPServer1
(scalance)(External Captive Portal "AuthText1")# url "/aruba.php"
(scalance)(External Captive Portal "AuthText1")# server-fail-through
(scalance)(External Captive Portal "AuthText1")# switch-ip
(scalance)(External Captive Portal "AuthText1")# no auto-whitelist-disable
(scalance)(External Captive Portal "AuthText1")# end
(scalance)# commit apply