Siemens SCALANCE W1750D CLI - Page 709

CLI Commands
4.20 W
SCALANCE W1750D CLI
Function Manual, 03/2019, C79000-G8976-C452-04
709
Syntax
wired-port-profile <port>
access-rule-name <name>
allowed-vlan [<vlan>]
auth-server <name>
auto-recovery
auto-recovery-interval <interval>
called-station-id
captive-portal {<type> [exclude-uplink <types>] | external [Profile <name>]
[exclude-uplink<types>]}
content-filtering
dot1x
dot1x-timer-idrequest-period
dot3bz
duplex <duplex>
inactivity-timeout <interval>
loop-detection-interval <interval>
loop-protect
l2-auth-failthrough
mac-authentication
native-vlan <vlan>
no...
poe
radius-accounting
radius-accounting-mode {user-association|user-authentication}
radius-interim-accounting-interval <minutes>
radius-reauth-interval <minutes>
server-load-balancing
set-role <attribute>{{equals|not-equal|starts-with|ends-
with|contains}<operator> <role>|value-of}
set-role-mac-auth <mac-only>
set-role-machine-auth <machine-only> <user-only>
set-role-pre-auth <role>
set-role-unrestricted
set-vlan <attribute>{equals|not-equals|starts-with|ends-with|contains} <operator>
<VLAN- ID>|value-of}