TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
119
Basic software procedures
5.2 Completing the maintenance task
5.2.1 Updating or recovering the system board BIOS and
iRMC
I
For the Japanese market, follow the instructions provided separately.
After replacing the system board, memory or a CPU, it is essential to upgrade
the BIOS and iRMC to the latest version. The latest BIOS and iRMC versions
are available from the Fujitsu support internet pages at:
http://ts.fujitsu.com/support/
(global market)
http://www.fujitsu.com/jp/products/computing/servers/primergy/downloads/
(Japanese market)
I
Fujitsu does not assume responsibility for any damage done to the
server or for the loss of any data resulting from BIOS updates.
5.2.1.1 Updating or recovering the system board BIOS
BIOS flash procedure
Ê
Perform the BIOS flash procedure as described in your server’s "BIOS
Setup Utility" reference manual.
BIOS recovery procedure
Ê
Perform the BIOS recovery procedure as described in your server’s "BIOS
Setup Utility" reference manual.
5.2.1.2 Updating or recovering the iRMC
iRMC flash procedure
Ê
Prepare a USB stick including the bootable iRMC firmware update image.
Ê
Connect the USB stick containing the iRMC firmware to a USB port.
Ê
Restart the server. The system will start the POST process.
Ê
During POST, press
[F12]
and select the connected USB stick as boot
device. The system will detect the USB stick.
To Next Page
Loading...
