TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
269
Hard disk drive (HDD) / solid state drive (SSD)
Figure 184: Connecting the cable to the non-hot-plug HDD/SSD 2
Ê
If applicable, connect the cable C35 (P3) to the non-hot-plug HDD/SSD 2 as
shown.
7.6.1.7 Concluding steps
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Resuming BitLocker functionality" on page 136
Ê
"Switching on the server" on page 90
To Next Page
Loading...
