TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
481
System board and components
14.6.3.2 Replacing the iRMC microSD card
Ê
Remove the defective iRMC microSD card as described in section
"Removing the iRMC microSD card" on page 479.
V CAUTION!
The iRMC microSD card contains customer information. After
replacing the iRMC microSD card, hand the defective card over to the
customer. If the customer requests disposal of the defective iRMC
microSD card, proceed as follows:
Ê
Using a pair of side-cutting pliers, cut the iRMC microSD card in
half.
Ê
Install the new iRMC microSD card as described in section "Installing the
iRMC microSD card" on page 477.
14.6.3.3 Concluding steps
Ê
If applicable, install the riser module 2 as described in section "Installing a
riser module" on page 95.
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
To Next Page
Loading...
