TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual
507
Converting a tower model to a rack model
15.3 Concluding steps
Ê
"Installing the top cover" on page 76
Ê
Mount the support bracket and rack mounting rails in the rack as described
in the "Rack Mounting Kit - RMK-F2 Drop-In" Mounting Instructions.
I
The document is available online.
Ê
"Mounting the server in the rack" on page 78
Ê
Reconnect all external cables.
Ê
"Connecting the power cord" on page 87
Ê
"Switching on the server" on page 90
Ê
Update your server’s chassis information on the Chassis ID EPROM
integrated into the front panel board. For further information on how to obtain
and use the
ChassisId_Prom
Tool, refer to section "Using the Chassis ID
Prom Tool" on page 139.
Ê
Change the chassis model setting to "rack server" as described in section
"Specifying the chassis model" on page 141.
To Next Page
Loading...
