Fujitsu PRIMERGY TX2560 M2 Upgrade And Maintenance Manual

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual 401
Accessible drives
12.2.5 Concluding steps
Ê If applicable, install the expansion card in slot 1 as described in section
"Installing expansion cards in standard slots" on page 295.
Ê If applicable, "Installing a riser module" on page 95
Ê "Installing the system fan holder" on page 94
Ê "Installing the system air duct" on page 92
Ê "Reassembling" on page 74
Ê "Connecting the power cord" on page 87
Ê "Switching on the server" on page 90
Ê If applicable, "Reconfiguring the backup software solution" on page 124
12.3 Removing accessible drives
12.3.1 Preliminary steps
Ê "Locating the defective server" on page 55
Ê "Removing backup and optical disk media" on page 114
Ê "Verifying and configuring the backup software solution" on page 115
Ê "Shutting down the server" on page 58
Ê "Disconnecting the power cord" on page 59
Upgrade and Repair Unit
(URU)
Hardware: 10 minutes
Tools:
tool-less

Fujitsu PRIMERGY TX2560 M2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX2560 M2
Category	Server
Language	English