Fujitsu PRIMERGY TX2560 M2 Upgrade And Maintenance Manual

TX2560 M2 / RX2560 M2 Upgrade and Maintenance Manual 151
Power supply unit (PSU)
Ê Remove the power cord from the PSU to be replaced as described in section
"Disconnecting the power cord" on page 59.
6.4.2 Removing the defective PSU
Ê Remove the PSU as described in section "Removing a PSU" on page 149.
6.4.3 Installing the new PSU
Ê Install the PSU as described in section "Installing a PSU" on page 147.
6.4.4 Concluding steps
Ê Connect the power cord to the new PSU as described in section "Connecting
the power cord" on page 87.
Ê Only when replacing a PSU in a non-redundant configuration:
"Switching on the server" on page 90
Ê "Performing a fan test" on page 129

Fujitsu PRIMERGY TX2560 M2 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX2560 M2
Category	Server
Language	English